During mid 2014 Gedding Mill were invited to quote for the manufacture on a supply only basis, for 8.5 tonnes of Metal Balustrade to a new commercial building in West London. We were responsible for ensuring the project stayed on time, on budget and within the required quality and tolerances.

The balustrading was supplied in a modular format, using a selection of mild steel sections which were then fabricated to an overall tolerance of +/- 0.2mm per module.

All works were then powdercoated and packaged ready for delivery to site.

Commercial work on a supply only basis is our speciality.

Copper fabrication for high-end and industrial uses are regularly in production at Gedding Mill.

We produce many types of bespoke brass metalwork and brass fabrication.  We can offer welding, forming, and CNC turnings as well as all the other fabrication techniques.

Over the years we’ve supplied all sorts of Aluminium fabrications and have developed an enviable reputation on account of our dedication to fabrication accuracy and quality of finish.

We can supply cut Aluminium sheet upto a length of 4 metres and can carry out press braking operations up to a length of 3.1 metres. Powder coated flats, angles, box and channel can be supplied cut to length (and drilled and c/sunk) within very short lead times.

It is usual for us to work with companies that often have a very short and mission critical lead time. This is a responsibility that we take very seriously. We maintain our promises and understand its fundamental importance.

With stainless steel fabrication, we go the extra mile in our attention to detail.

Stainless Steel Fabrications, Stainless Steel Angle & Box section frames & stainless steel sheet metal fabrication all in 240 Grit / DP1 are our speciality.

We have developed an enviable reputation on account of our dedication to fabrication accuracy and quality of finish. 

It is usual for us to work with companies that often have a very short and mission critical lead time. This is a responsibility that we take very seriously. 

We maintain our promises and understand its fundamental importance.

Steel fabrications for industrial (and other uses) are constantly in production at Gedding Mill, our fabrication team has over 50 years experience in the fabrication industry and are capable of producing top quality steel fabrication works.

The pictures here represent about 0.1% of our fabrications created over the last 25 years, but due to the structural nature of these fabrications we’ve often not taken too many pictures. Structural box section subframes have been a mainstay of the business.

These have gone on to support seating units, planter units, reception desks, vanity units, feature walls, disability ramps, theatre stages – The list goes on and on.